How To Scan For Satellite Channels In Ghana

Advertisements

Multi TV installation guide, channels, and frequencies, how to scan for satellite channels in Ghana.

For the lovers of what Ghanaian television has to offer, Multi TV is a top pick. Offering more than 20 TV and radio channels in digital format, Multi TV meets all the entertainment, news and sports needs of its viewers. Multi TV hosts all the leading TV channel providers in Ghana, including the live streaming and broadcasting of events and news. Most people, however, are not aware of the installation procedures of this renowned TV. Below is the Multi TV installation guide.

Multi TV is a countrywide free-to-air television based in Ghana. Operating more than 20 television and radio channels (and counting), Mutli TV offers a variety of entertainment, news and sports channels in digital format. Multi TV also provides the live streaming of news, events and videos from all the leading TV channel providers in Ghana. Here is the Multi TV installation guide.

Multi TV installation guide

The Multi TV satellite direction is positioned towards the east. Therefore, you must ensure your satellite dish is facing the east during Multi TV installation. This is because, the signal comes from that direction. The following is a step-by-step guide for Multi TV installation.

  1. First, install the dish using the dish manual. The dish comes with a round plate, a dish cap, a stand, an LNB and an LNB holder, dish accessories.
  2. Assemble the dish, then carefully fix the LNB in its holder at the last end of the angle bar. (You can get a dealer to help fix the dish for you then proceed with the installation).
  3. Mount the stand with the four holes at the rear end on a wall where you deem fit. (The stand has eight holes all together. When fixing the stand, be careful not to bend or turn the stand at the wrong position. Hence, first hold the stand firmly with your hands as if mounting the dish, then see if the dish is well fixed in a way that it can track signal while facing the east direction. If everything is okay, mount the stand on the wall).
  4. Use normal nails on a facial board and use concrete nails for a wall.
  5. Mount the dish in a place where there are no objects blocking the signal (e.g. tall buildings, planted trees, human object, thick electric cables etc).
  6. After mounting the dish, tighten it partially to allow for adjusting and turning. This is because you may have to turn the dish vertically and horizontally until the signal shoots or flashes.
  7. Connect the coaxial cable from your dish to the receiver using the connecters.
  8. Connect it into the receiver’s LNB input.
  9. Power the receiver on.
READ ON:  How to check your MTN number in Ghana

After completing the above procedures, the next step is the digital box installation. The following is the Multi TV installation guide for each different decoder.

Syndicated box decoder

  1. Press MENU.
  2. On INSTALLATION press OK.
  3. Select MANUAL SEARCH and press OK.
  4. Press the green button on the remote to edit the frequency.
  5. Select MODIFY.
  6. Press OK.
  7. Input 12522
  8. Press OK.
  9. Select POLARIZATION.
  10. Press the RIGHT button on the OK to change to vertical.
  11. Press OK.
  12. Then select SYMBOL RATE 27000
  13. Press on the BLUE BUTTON to save and exit OK to start scanning.
  14. Move channel down knob to start search.
  15. Press OK to start scanning.
  16. Press exit.
READ ON:  WEATHER WARNING || Full list of areas to be hit with rainstorm today

Strong box decoder

  1. Press MENU.
  2. Press on the RIGHT volume button.
  3. Input 0000 as password.
  4. Select MANUAL SCAN and press OK.
  5. Press RED BUTTON on the remote to select transponder ASTRA 3A/3B.
  6. Press GREEN BUTTON to add TP list.
  7. Input frequency 12522
  8. Go to symbol rate and input 27000
  9. Change the polarization to either V or H to make the bars change to green color.
  10. Press OK to scan.
  11. Exit.

Somotex ash box decoder

  1. Press MENU.
  2. Select INSTALLATION.
  3. Press the red button to EDIT.
  4. Input 12522 on the FREQUENCY.
  5. Press OK.
  6. Input 27000 on the SYMBOL RATE.
  7. Select POLARITY and press RIGHT button to select either Vertical or Horizontal.
  8. Select SAVE and press OK.
  9. Press on the BLUE button and OK to scan.
  10. Press OK on YES.
  11. Press EXIT to begin viewing channels.
READ ON:  WEATHER WARNING || Full list of areas to be hit with thunder and rain today

Quality box decoder

  1. Press MENU.
  2. Scroll down to DVB-S, Click OK.
  3. Input 0000 and press OK.
  4. Select DISH SETTINGS.
  5. Click the YELLOW BUTTON on the remote to edit TP.
  6. Scroll down to SYMBOL RATE and key in 27000
  7. Scroll to YES and click OK.
  8. Scroll to SERVICE SEARCH, click OK.
  9. Scroll to START SCAN and click OK.

NOTE:

UNDER NO CIRCUMSTANCE SHOULD AN APPLICANT PAY MONEY TO ANYONE IN GETTING A JOB WE HAVE PUBLISHED 

WhatsApp & Telegram Job Alert

To get daily Job Alerts on Whatsapp, Join Our WhatsApp Group via the link below.

NOTE: PLEASE IF YOU’RE ON ANY OF OUR WHATSAPP GROUP, DON’T JOIN THIS ONE

CLICK HERE TO JOIN WHATSAPP GROUP

CLICK HERE TO JOIN TELEGRAM CHANNEL

Leave a Reply